E-REPAIR Soluzioni di continuità produttiva
Social barra blu

Select your language

Share Link copied!

Siemens MICROMASTER Vector and MIDIMASTER Vector (root 6SE32)

With the root 6SE32 Siemens identifies the MICROMASTER Vector (MMV) and MIDIMASTER Vector (MDV) inverters, with vector control for more stable torque even at low speeds. MICROMASTER Vector units cover low power ratings, MIDIMASTER Vector units medium and high ratings.

The E-Repair catalogue covers about 80 part numbers from these series.


⚙️ Versions in the catalogue

RootSeriesExamples
6SE3210 – 6SE3212MICROMASTER VectorMMV12, MMV25, MMV37, MMV55, MMV75, MMV110
6SE3222 – 6SE3231MIDIMASTER Vectorfrom MDV1100 to MDV7500

The number after the slash indicates the supply voltage: /2 for 208 – 240 V, /3 for 380 – 500 V and /4 for 525 – 575 V. Many models are available with or without an integrated class A filter. The catalogue also includes dedicated braking resistors.

👉 6SE3211-1DA40 – MICROMASTER Vector

👉 6SE3223-0DH40 – MIDIMASTER Vector

👉 6SE3231-0CK40 – MIDIMASTER Vector

👉 Search the catalogue: 6SE321 · 6SE322 · 6SE323


⚠️ Typical faults

  • power modules damaged by overloads or motor faults
  • degraded DC link capacitors
  • control boards with aged components
  • worn fans and overtemperature, especially on MIDIMASTER units

🛠️ E-Repair services for MICROMASTER Vector and MIDIMASTER Vector

As Approved Partner Siemens – Industry Services, E-Repair supports production continuity:

🔧 Component-level repair in E-Repair's certified in-house laboratory, with diagnosis and repair where technically feasible.

♻️ Refurbishment with replacement of components subject to ageing and functional testing according to the agreed scope of work.

🚚 Advance replacement with a refurbished or new product, if available in stock and after a compatibility check.

💾 Support in saving and restoring parameters.

🛠️ On-site and remote technical assistance for diagnosis and recommissioning.

✅ Standard 12-month warranty on the services for which it applies, extendable up to 24 months under the applicable conditions.


❓ Frequently asked questions

✔️ What is the difference between MICROMASTER Vector and MIDIMASTER Vector?

They are the same technology in different sizes: MICROMASTER Vector for low power ratings, MIDIMASTER Vector for medium and high ratings.

✔️ Can they be repaired?

Yes, in most cases. E-Repair carries out a component-level diagnosis.

✔️ What is needed for the diagnosis?

The full part number from the rating plate, a description of the fault and the data of the connected motor.


📚 Further reading

👉 MICROMASTER range · 👉 First generation SIMOVERT P · 👉 MICROMASTER ECO and MIDIMASTER ECO


ℹ️ The information provided is general and indicative. Before purchase, installation or commissioning, check the data against the official Siemens documentation or contact E-Repair.

fas fa-times

GREEN CHOICE

Dispose of the used or defective product by replacing it with a working and tested remanufactured. In addition to helping the environment, thanks to the Circular Economy, E-Repair will recognize you the residual value of the product, saving on the purchase of the remanufactured product.
fas fa-times
Research and Innovation projects
  • Progetto Horizon 2020 – Digiprime
  • Progetto "E-Repair Digitale e Sostenibile" finanziato nel quadro del POR FESR Toscana 2021 -2027
  • Progetto "ICS 4.0" finanziato dal POR FESR Toscana 2014-2020
  • Progetto “Innovazione E-Repair” finanziato nel quadro del POR FESR Toscana 2014-2020
  • Operazione “E-REPAIR_2021” /Progetto Co-finanziato/Finanziato dal POR FESR Toscana 2014-2020
  • Progetto New E Repair 2015 finanziato nel quadro del POR FESR Toscana 2014-2020