NOT AVAILABLE
Services:
Repair
Remanufacturing
Courtesy products
Products for sale
Maintenance
Technical support
| Dimensions and weight 6FX2001-5QN13 | |
|---|---|
| Weight | 0,5 kg |
| Height | 0 cm |
| Depth | 0 cm |
| Customs information 6FX2001-5QN13 | |
| The 6FX2001-5QN13 code is part of the PRODUCT GROUP 9310, and of the GROUP CODE R220 and of the PRODUCT CLASS C: products manufactured / produced to order, which cannot be reused or re-utilised or be returned against credit. | |
| SKU | 6FX20015QN13 |
| UPC | 040892936858 |
| Custom Code | 90314990 |
| Export control provisions (ECCN) | AL : N / ECCN : N |
| Compliance with RoHs directives | Since: 29.11.2011 |
| Reach Art. 33 Duty |
Lead CAS-No. 7439-92-1 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
|
| WEEE Take-Back Directive | In accordance with the WEEE Directive (2012/19/EU), the product is subject to the obligation of take-back at the end of its life. The manufacturer is responsible for the correct treatment and disposal of the industrial electronic product in accordance with current regulations. |
| 6FX2001-5QN13 Product step | |
| The 6FX2001-5QN13 Product is currently in production | |
The Siemens 6FX2001-5QN13 is an absolute encoder. It measures shaft position and transmits the value to the automation system. Matching the device requires checking the protocol, mounting arrangement and resolution.
The following specifications are listed for this variant: Interfaces listed: PROFINET; Resolution: 16 bit. Before use, compare these data with the nameplate and the machine project.
Position measurement on automated machines; control of rotary axes; replacement of encoders on compatible systems. Use remains subject to documented compatibility with the installation.
E-Repair offers diagnostics and component-level repair, electronic refurbishment and advance exchange with a refurbished unit, subject to availability. On-site or remote support, backup and configuration checks can complement the intervention. Technical cleaning with biodegradable solvents and restoration are assessed according to the component. The standard warranty is 12 months, extendable to 24 months where applicable.
E-Repair’s approach to circularity refers to BS 8001:2017 and AFNOR XP X30-901:2018. Emissions reporting under ISO 14064-1 applies to the organisation and does not automatically quantify the footprint of an individual spare part.
Yes. Send the full product code and a description of the fault. E-Repair will assess diagnostics and component-level repair, with shipping instructions provided by Customer Care.
The protocol, signal, resolution, power supply and compatibility with the control system must be checked.
Product lifecycle status and commercial availability must be confirmed in the current Siemens catalogue. E-Repair can check service and replacement options.
Provide the encoder nameplate, drive product code, alarms and connection diagram.
Yes. After the intervention, check feedback, counting direction and reference positions in accordance with the procedures specified for the axis.
ℹ️ This information is general and indicative and may contain inaccuracies. Before purchasing, installing or commissioning the product, check the manufacturer’s official documentation or contact E-Repair.
Technical source: Siemens – catalogue or technical data sheet 6FX2001-5QN13
E-Repair assumes no responsibility for the accuracy of this information. Always consult the manufacturer for the most up-to-date instructions and information.
Torna IndietroTorna Indietro
GREEN CHOICE
ES 
DE 
FR 
IT 
