E-REPAIR Business continuity solutions
Social barra blu

Select your language

Share Link copied!

Siemens SIMATIC S7-300: input and output modules, function and communication modules

Around the CPU, a SIMATIC S7-300 uses signal modules (SM) for digital and analogue inputs and outputs, function modules (FM) for counting, positioning and closed-loop control, and point-to-point communication processors. These are the modules most exposed to faults, because they are connected directly to the field.

The E-Repair catalogue covers about 120 signal modules, plus function modules, CPs and front connectors.


🔌 Signal modules (SM)

RootModulePart numbers
6ES7321SM 321, digital inputs26
6ES7322SM 322, digital outputs36
6ES7323SM 323, digital inputs and outputs5
6ES7326SM 326, fail-safe modules6
6ES7331SM 331, analogue inputs25
6ES7332SM 332, analogue outputs15
6ES7334SM 334, analogue inputs and outputs4
6ES7338SM 338, encoder acquisition4

⚙️ Function and communication modules

  • FM function modules (roots 6ES7350 – 6ES7357), for example FM 352 for electronic cams, FM 354 for positioning, FM 355 for PID control and FM 357 multi-axis.
  • CP 340 and CP 341 point-to-point communication processors (roots 6ES7340 and 6ES7341, 25 part numbers).
  • Front connectors and wiring accessories (root 6ES7392, 22 part numbers).

👉 6ES7321-1BH00-0AA0 – SM 321 digital inputs

👉 6ES7322-1BF00-0AA0 – SM 322 digital outputs

👉 6ES7331-1KF00-0AB0 – SM 331 analogue inputs

👉 6ES7355-1VH00-0AE0 – FM 355 control module

👉 Search the catalogue: 6ES7321 · 6ES7322 · 6ES7331 · 6ES735


⚠️ Typical faults

  • input or output channels burnt out by short circuits or overvoltages in the field
  • analogue modules with out-of-range or unstable readings
  • function modules that lose parameters or do not communicate with the CPU
  • point-to-point CPs that no longer communicate with serial devices
  • oxidised front connectors and contacts

🛠️ E-Repair services for S7-300 modules

As Approved Partner Siemens – Industry Services, E-Repair supports production continuity:

🔧 Component-level repair in E-Repair's certified in-house laboratory, with diagnosis and repair where technically feasible.

♻️ Refurbishment with replacement of components subject to ageing and functional testing according to the agreed scope of work.

🚚 Advance replacement with a refurbished or new product, if available in stock and after a compatibility check.

🛠️ On-site and remote technical assistance for diagnosis and recommissioning.

✅ Standard 12-month warranty on the services for which it applies, extendable up to 24 months under the applicable conditions.


❓ Frequently asked questions

✔️ Can a single SM module be repaired?

Yes, in most cases. E-Repair carries out a diagnosis and assesses a component-level repair.

✔️ Do FM modules need to be reconfigured after repair?

Often yes: the parameters reside in the CPU project and are reloaded at start-up, but it is advisable to check them.

✔️ Do fail-safe modules require special care?

Yes: after replacement, the safety address and parameters must be checked according to the machine procedures.


📚 Further reading

👉 SIMATIC S7-300 · 👉 S7-300 CPUs and power supplies · 👉 ET 200SP, ET 200M and ET 200pro


ℹ️ The information provided is general and indicative. Before purchase, installation or commissioning, check the data against the official Siemens documentation or contact E-Repair.

fas fa-times

GREEN CHOICE

Dispose of the used or defective product by replacing it with a working and tested remanufactured. In addition to helping the environment, thanks to the Circular Economy, E-Repair will recognize you the residual value of the product, saving on the purchase of the remanufactured product.
fas fa-times
Research and Innovation projects
  • Progetto Horizon 2020 – Digiprime
  • Progetto "E-Repair Digitale e Sostenibile" finanziato nel quadro del POR FESR Toscana 2021 -2027
  • Progetto "ICS 4.0" finanziato dal POR FESR Toscana 2014-2020
  • Progetto “Innovazione E-Repair” finanziato nel quadro del POR FESR Toscana 2014-2020
  • Operazione “E-REPAIR_2021” /Progetto Co-finanziato/Finanziato dal POR FESR Toscana 2014-2020
  • Progetto New E Repair 2015 finanziato nel quadro del POR FESR Toscana 2014-2020