Siemens SIMATIC ET 200SP, ET 200M and ET 200pro
This guide looks in detail at three widely used SIMATIC distributed I/O families: ET 200SP, the current compact platform; ET 200M, which brings S7-300 modules into the field via PROFIBUS or PROFINET; and ET 200pro, with a high degree of protection for mounting directly on the machine.
The E-Repair catalogue covers about 190 part numbers from these families.
⚙️ ET 200SP
| Root | Content | Part numbers |
| 6ES7155-6 | IM 155-6 PROFINET and PROFIBUS interface modules | 7 |
| 6ES7131-6, 6ES7132-6 | Digital input and output modules | 21 |
| 6ES7134-6, 6ES7135-6 | Analogue input and output modules | 21 |
| 6ES7136-6 | Fail-safe modules | 6 |
| 6ES7193-6 | BaseUnits and accessories | 20 |
⚙️ ET 200M
- IM 153-1, IM 153-2 interfaces (also for redundant configurations) and IM 153-4 PN (roots 6ES7153-1, -2, -4).
- Active bus modules for replacing modules while the plant is running, and mounting rails (roots 6ES7195-7 and 6ES7195-1).
- Signal modules from the S7-300 series.
⚙️ ET 200pro
- Connection modules and interfaces, also in the ECOFAST version (root 6ES7194-4, 37 part numbers).
- Digital and analogue electronic modules (roots 6ES7142-4 and 6ES7144-4) and special modules (root 6ES7148-4).
👉 6ES7155-6AA01-0BN0 – IM 155-6 PN ET 200SP
👉 6ES7134-6FB00-0BA1 – ET 200SP analogue module
👉 6ES7153-2AA00-0XB0 – IM 153-2 ET 200M interface
👉 6ES7194-4AA00-0AA0 – ET 200pro connection module
👉 Search the catalogue: 6ES7155-6 · 6ES7153 · 6ES7194-4
⚠️ Typical faults
- interface modules losing communication with the controller
- input or output channels damaged by overvoltages in the field
- BaseUnits and bus modules with damaged contacts
- on ET 200pro versions, deteriorated seals and connectors
🛠️ E-Repair services for ET 200SP, ET 200M and ET 200pro
As Approved Partner Siemens – Industry Services, E-Repair supports production continuity:
🔧 Component-level repair in E-Repair's certified in-house laboratory, with diagnosis and repair where technically feasible.
♻️ Refurbishment with replacement of components subject to ageing and functional testing according to the agreed scope of work.
🚚 Advance replacement with a refurbished or new product, if available in stock and after a compatibility check.
🛠️ On-site and remote technical assistance for diagnosis and recommissioning.
✅ Standard 12-month warranty on the services for which it applies, extendable up to 24 months under the applicable conditions.
❓ Frequently asked questions
✔️ Can an ET 200M module be replaced with the plant running?
Yes, if the station is mounted on active bus modules; otherwise it must be switched off. It is advisable to check this before the intervention.
✔️ Can ET 200SP modules be repaired?
Yes, in many cases, in particular interfaces and analogue modules.
✔️ What is needed for the diagnosis?
The full part number, the position in the station and the controller diagnostic message.
📚 Further reading
👉 SIMATIC ET 200 · 👉 ET 200S · 👉 ET 200B, L and X · 👉 S7-300 I/O modules
ℹ️ The information provided is general and indicative. Before purchase, installation or commissioning, check the data against the official Siemens documentation or contact E-Repair.
ES
DE
FR
IT 