Services:
Repair
Remanufacturing
Courtesy products
Products for sale
Maintenance
Technical support
Select your language
Services:
Repair
Remanufacturing
Courtesy products
Products for sale
Maintenance
Technical support
| Dimensions and weight 6ES7321-1BH50-0AA0 | |
|---|---|
| Weight | 0,23 kg |
| Height | 0 cm |
| Depth | 0 cm |
| Customs information 6ES7321-1BH50-0AA0 | |
| The 6ES7321-1BH50-0AA0 code is part of the PRODUCT GROUP 2288, and of the GROUP CODE R151 and of the PRODUCT CLASS A: Standard product which is a stock item could be returned within the returns guidelines/period. | |
| SKU | 6ES73211BH500AA0 |
| EAN | 4025515060741 |
| UPC | 662643172027 |
| Custom Code | 85389091 |
| Export control provisions (ECCN) | AL : N / ECCN : N |
| Compliance with RoHs directives | Since: 31.03.2008 |
| Reach Art. 33 Duty |
Lead monoxide (lead ... CAS-No. 1317-36-8 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead monoxide (lead oxide) Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
|
| WEEE Take-Back Directive | In accordance with the WEEE Directive (2012/19/EU), the product is subject to the obligation of take-back at the end of its life. The manufacturer is responsible for the correct treatment and disposal of the industrial electronic product in accordance with current regulations. |
| 6ES7321-1BH50-0AA0 Product step | |
| Siemens has declared the product 6ES7321-1BH50-0AA0 obsolete since 01.10.2023, i.e. out of production | |
The Siemens 6ES7321-1BH50-0AA0 is an SM 321 digital input module for SIMATIC S7-300 controllers, with 16 electrically isolated 24 V DC digital inputs, designed to acquire binary signals from sensors and field devices.
What distinguishes this module is its source input logic (referred to by Siemens as "M-lesend", M-reading, in German): the input detects signal "1" when the sensor switches towards the reference potential M, with an input voltage of -13 to -30 V, while signal "0" corresponds to a voltage of -5 to +30 V. It is therefore suitable for installations wired with sensors that switch to M.
The module operates with a load voltage L+ of 24 V DC (permissible range 20.4–28.8 V), draws a maximum of 10 mA from the 5 V DC backplane bus and has a typical power loss of 3.5 W. The inputs comply with the IEC 61131 type 1 input characteristic, draw typically 7 mA at signal "1" and have a fixed input delay of 1.2 to 4.8 ms. 2-wire sensors can also be connected, with a permissible quiescent current of up to 1.5 mA.
The inputs are electrically isolated by optocouplers in one group of 16, with isolation tested at 500 V DC, and each channel has a green status LED. Connection is made via a 20-pin front connector, with cable lengths of up to 1000 m shielded or 600 m unshielded. The module has the standard S7-300 width of 40 mm and weighs approximately 0.24 kg.
Siemens has announced the product phase-out for this part number: the module therefore remains in high demand as a spare part for existing S7-300 systems.
E-Repair offers a complete package of services focused on production continuity:
🔧 Component-level repair in our in-house laboratory
♻️ Electronic refurbishment with zero-hour reset
🚚 Advance replacement with a refurbished unit (if available in stock)
🛠️ On-site and remote technical support
💾 Machine parameter backup and configuration check
🌐 Technological cleaning with biodegradable solvents
✅ Standard 12-month warranty, extendable up to 24 months (where applicable)
➡️ All services are delivered in compliance with the circular economy standards BS 8001:2017 and AFNOR XP X30-901:2018, as well as ISO 14064-1 certification, which is essential for managing the Carbon Footprint (Scope 3) across the supply chain.
Both are SM 321 modules with 16 inputs at 24 V DC and a 20-pin front connector. However, the 6ES7321-1BH50-0AA0 has source inputs (M-reading), i.e. it detects the signal when the sensor switches towards M, while the 6ES7321-1BH02-0AA0 is the standard version. The two modules are not interchangeable without checking the sensor wiring.
The module uses the 20-pin S7-300 front connector, available with screw terminals (6ES7392-1AJ00-0AA0) or spring-loaded terminals (6ES7392-1BJ00-0AA0). When replacing the module, the already wired connector is simply moved to the new module without redoing the connections.
Siemens has announced the product phase-out for this part number. To ensure the continuity of existing systems, E-Repair offers component-level repair and, if available, a refurbished module in advance.
The most frequent problems include individual inputs that do not switch or remain permanently active, often due to overvoltages or short circuits in the field, damaged optocouplers, status LEDs that do not match the actual signal, oxidised front connector contacts and communication problems with the CPU on the backplane bus.
Yes. E-Repair carries out component-level repair with functional testing and, if available in stock, can supply a refurbished module in advance to reduce machine downtime.
ℹ️ The information in this product sheet is general and indicative and may contain inaccuracies or errors. Before purchasing, installing or commissioning, always check the technical data in the manufacturer's official documentation or contact E-Repair.
E-Repair assumes no responsibility for the accuracy of this information. Always consult the manufacturer for the most up-to-date instructions and information.
GREEN CHOICE