AVAILABLE
Services:
Repair
Remanufacturing
Courtesy products
Products for sale
Maintenance
Technical support
| Dimensions and weight 1FK2103-2AG00-1MA0 | |
|---|---|
| Weight | 0 kg |
| Height | 0 cm |
| Depth | 0 cm |
| Customs information 1FK2103-2AG00-1MA0 | |
| The 1FK2103-2AG00-1MA0 code is part of the PRODUCT GROUP , and of the GROUP CODE and of the PRODUCT CLASS | |
| SKU | 1FK21032AG001MA0 |
| WEEE Take-Back Directive | In accordance with the WEEE Directive (2012/19/EU), the product is subject to the obligation of take-back at the end of its life. The manufacturer is responsible for the correct treatment and disposal of the industrial electronic product in accordance with current regulations. |
| 1FK2103-2AG00-1MA0 Product step | |
| The 1FK2103-2AG00-1MA0 Product is currently in production | |
The Siemens 1FK2103-2AG00-1MA0 is a SIMOTICS S-1FK2 synchronous servomotor in HD (High Dynamic) design, built for fast and precise motion in low-power servo drives.
The HD design is intended for applications with high accelerations and short positioning cycles, where high dynamic performance and precise position and speed control are required.
The motor has a stall torque of 0.64 Nm and a rated power of 0.2 kW at a rated speed of 3000 rpm, supplied by a converter for 200–240 V networks. The degree of protection is IP64 and the shaft is 14 x 30 mm with keyway.
It is equipped with an AM22DQC absolute encoder with 22-bit resolution and 12-bit multi-turn, which retains the absolute position even after power-off, without homing. The OCC interface (One Cable Connection) carries power and encoder signal in a single cable, connected via a rotatable M12 connector.
E-Repair offers a complete package of services focused on production continuity:
🔧 Component-level repair in our in-house laboratory
♻️ Electronic regeneration with zero-hour reset
🚚 Advance shipment of a regenerated unit (if available in stock)
🛠️ On-site and remote technical assistance
💾 Machine parameter backup and configuration check
🌐 Technological cleaning with biodegradable solvents
✅ Standard 12-month warranty, extendable up to 24 months (where applicable)
➡️ All services are provided in compliance with the circular economy standards BS 8001:2017 and AFNOR XP X30-901:2018, as well as ISO 14064-1 certification, essential for managing the Carbon Footprint (Scope 3) in the supply chain.
Yes. After you submit a request, the E-Repair Customer Care team will provide all the instructions for shipping the motor to the laboratory, where windings, bearings and encoder will be checked.
OCC (One Cable Connection) means that power and encoder signal travel in a single cable to the converter. This reduces wiring and simplifies installation, but requires a converter and a cable that support this technology.
The multi-turn absolute encoder retains the position even when the machine is switched off, but after replacing the motor the mechanical reference of the axis must be checked and, if necessary, reset according to the machine procedures. E-Repair can support you, also remotely.
The most common symptoms include noise or vibration caused by the bearings, encoder errors reported by the converter, overheating, loss of torque and irregular or jerky axis movements.
Yes. If available in stock, the servomotor can be shipped quickly. Contact E-Repair Customer Care stating the part number and the model of the converter it is connected to.
ℹ️ The information in this product sheet is general and indicative and may contain inaccuracies or errors. Before purchase, installation or commissioning, always check the technical data in the official manufacturer documentation or contact E-Repair.
E-Repair assumes no responsibility for the accuracy of this information. Always consult the manufacturer for the most up-to-date instructions and information.
Torna IndietroTorna Indietro
GREEN CHOICE
ES 
DE 
FR 
IT 
