AVAILABLE
Services:
Repair
Remanufacturing
Courtesy products
Products for sale
Maintenance
Technical support
| Dimensions and weight 1FT6105-8AF71-1AH1 | |
|---|---|
| Weight | 39,5 kg |
| Height | 0 cm |
| Depth | 0 cm |
| Customs information 1FT6105-8AF71-1AH1 | |
| The 1FT6105-8AF71-1AH1 code is part of the PRODUCT GROUP , and of the GROUP CODE and of the PRODUCT CLASS | |
| SKU | 1FT61058AF711AH1 |
| WEEE Take-Back Directive | In accordance with the WEEE Directive (2012/19/EU), the product is subject to the obligation of take-back at the end of its life. The manufacturer is responsible for the correct treatment and disposal of the industrial electronic product in accordance with current regulations. |
| 1FT6105-8AF71-1AH1 Product step | |
| The 1FT6105-8AF71-1AH1 Product is currently in production | |
The Siemens 1FT6105-8AF71-1AH1 is a large SIMOTICS S 1FT6 series synchronous servomotor, designed for axes with high torque requirements on machine tools and production machines.
The motor delivers a torque of 50 Nm (at 100 K temperature rise) at a rated speed of 3000 rpm and operates with natural cooling. Position detection is performed by an incremental sin/cos 1 Vpp encoder with 2048 pulses/revolution (I-2048), ensuring precise position and speed control.
The type of construction is IM B5 (also usable as IM V1 and IM V3), the power and signal connectors have a transverse right outlet and the shaft is plain. The motor has a holding brake, concentricity tolerance and vibration severity grade N and a shaft sealing ring for degree of protection IP65. The weight is approximately 39.5 kg.
E-Repair offers a complete package of services focused on production continuity:
🔧 Component-level repair in our in-house laboratory
♻️ Electronic regeneration with zero-hour reset
🚚 Advance shipment of a regenerated unit (if available in stock)
🛠️ On-site and remote technical assistance
💾 Machine parameter backup and configuration check
🌐 Technological cleaning with biodegradable solvents
✅ Standard 12-month warranty, extendable up to 24 months (where applicable)
➡️ All services are provided in compliance with the circular economy standards BS 8001:2017 and AFNOR XP X30-901:2018, as well as ISO 14064-1 certification, essential for managing the Carbon Footprint (Scope 3) in the supply chain.
Yes. After you submit a request, the E-Repair Customer Care team will provide all the instructions for shipping it to the laboratory, where windings, bearings, encoder, brake and seals will be checked.
The brake holds the shaft when the motor is not powered, for example to keep vertical axes or suspended loads in position. It is not intended to brake the moving load during normal operation.
The most common symptoms include noise or vibration caused by the bearings, encoder errors reported by the drive, a brake that does not release or does not hold, overheating and loss of torque.
After mounting, the connections, the operation of encoder and brake and the axis calibration must be checked according to the machine procedures. E-Repair can support you, also remotely.
Yes. If available in stock, the servomotor can be shipped quickly. Contact E-Repair Customer Care stating the part number and the model of the drive it is connected to.
ℹ️ The information in this product sheet is general and indicative and may contain inaccuracies or errors. Before purchase, installation or commissioning, always check the technical data in the official manufacturer documentation or contact E-Repair.
E-Repair assumes no responsibility for the accuracy of this information. Always consult the manufacturer for the most up-to-date instructions and information.
Torna IndietroTorna Indietro
GREEN CHOICE
ES 
DE 
FR 
IT 
